會員廠商 / 全部 / 尚興不織布股份有限公司
| 會員廠名稱 | 尚興不織布股份有限公司 | ||
|---|---|---|---|
| 公司地址 | 325003 桃園市龍潭區楊銅路一段118巷151號 | ||
| 公司電話 | 03 4116201 | ||
| 公司傳真 | 03 4116965 | ||
| 官方網站 | https://www.sxnonwoven.com (官方網站) | ||
| 聯絡人 | 王瀅晶 | ||
| 聯絡電話 | 03-4116201 #18 | ||
| 電子郵件 | ivonne@sxnonwoven.com | ||
| 工廠地址 | 325003桃園市龍潭區楊銅路一段118巷151號 | ||
| 公司介紹 | 尚興不織布股份有限公司成立於1985年，資本額新台幣二千五百萬元．工廠於2016年由新北市樹林區搬遷到桃園市龍潭區現址． 龍潭廠佔地一英畝，樓板面積約1,600坪，是二層樓SRC鋼骨鋼筋混泥土結構．樓板面積雖比舊廠小了四成，但不論是產線動線與空間儲存效率皆比舊廠更有效率． 廠內除了全區皆使用電池式的堆高機外，所有烘箱的加熱系統皆不是傳統的重油，而是效率更高，更乾淨的天然氣． 不織布產線與捲材工序皆位於一樓主樓層，而成品加工皆位於二樓潔淨室內． 廠內一樓有兩套乾式短纖不織布生產線，年產量可達1,700噸．每條獨立產線皆配有各自的線上光學瑕疵檢測機，透過光學鏡頭，瑕疵點檢出類別從油汙、皺折、棉塊、蚊蟲、頭髮、到破洞，瑕疵檢出範圍最小可達0.35mm²． 二樓潔淨室內配置的加工設備可處理因應各類不織布用途的尺寸，從覆捲，點斷，切片，鬆緊帶加工，etc...等．搭配超過二百個儲位式棧板空間，尚興可以提供一站式的服務，從不織布應用到您所要的功能，外觀，尺寸，包裝，出口． 我們有超過15年服務與出口日本的經驗；從百元店，量販店，到品牌商皆為尚興服務的客戶． | ||
| 公司產品 | 1.熱壓不織布 2.熱風不織布 | ||
| CompanyName | SANXION NONWOVEN CO., LTD. | ||
|---|---|---|---|
| Company Address | No.151, Ln. 118, Sec. 1, Yangtong Rd., Longtan Dist., Taoyuan City 325003, Taiwan | ||
| Factory Address | No.151, Ln. 118, Sec. 1, Yangtong Rd., Longtan Dist., Taoyuan City 325003, Taiwan | ||
| Tel | 886 3 4116201 | ||
| Fax | 886 3 4116965 | ||
| WebSite | https://www.sxnonwoven.com (官方網站) | ||
| Contact | WANG,YING-CHING | ||
| Phone | 03-4116201 #18 | ||
| ivonne@sxnonwoven.com | |||
| brief introduction | Sanxion Nonwovens Co., Ltd. was established in 1985 with capital of NT$25 million. The factory was relocated in 2016 from New Taipei City to current address in Taoyuan City with better layout, bigger storages and more clean energy. It is a two storeys SRC structure with one acre of lot size and 57,000 sq ft of floor area. All Nonwoven production lines are located on main floor, converting machines are on 2nd floor with higher controled envirnment. All stackers are electrical, all heating systems (oven) are gas in this factory. Not only a raw material supplier, we are also an registered medical device manufacturer since 2020. We have two dry laid non-woven fabric production lines located on main floor. Annual production up to 1,700 tons. Each indivial production line comes with a AOI (Autotmatic online Inspection), capable to identify defects like hair, bugs, oil stain, wrinkles, holes, and etc from size of 0.35mm² and up. Converting machines including powder spraying, winding, pre-cutting, cutting. All medical devices daily consumption products are converted in clean room on 2nd floor. | ||
| Product | Products: Carding Nonwoven 1.Thermal Bonding Nonwoven 2.Air-Through Nonwoven | ||
| 產品圖檔 | |||
|---|---|---|---|
|
